Ordering Glass

Whether actually ordering or just requesting a quote, it is important that the guidlelines below be followed.

(For measuring arched openings you will need a pencil, paper, scissors or a razor and a straight edge ruler.)

 

For Square & Rectangular Cabinet Openings:

  From the back of your cabinet door, measure exactly the width and height of your rough opening. It is best to round up to the nearest 1/16" (sixteenth of an inch).
E.g. 14-11/32" should be rounded up to 14-15/16"

  For a sure fit up, deduct 1/8" from the width and height of your opening.
E.g. 15" x 26" rough opening should be ordered as 14-7/8" x 25-7/8". It's that easy!

 

For Arched Openings:

  Lay your cabinet door face down on a flat surface.

  Trace the back outline of your door onto your paper pattern by rubbing a pencil along the edges of your door opening. It is best to tape your paper pattern in place before you start pencil outlining.

  After outlining, cut the paper pattern carefully using a scissor or razor and a straight edge. Remember to cut your pattern approximately 1/8" smaller than your width and height. - E.g. If your opening is 12" x 18", your pattern should be 11-7/8" x 17-7/8" - Send your drawn pattern to us: It's that easy!

• Request a quote for your custom pattern by clicking here.
• For questions or concerns, call us at 732.681.6003.
• View our extensive list of Cabinet Glass.

It's that easy!